fablight Laser Cutting Machines
Designed and built in the USA.
A machine for everyone
FabLight's products are designed to meet the needs of many different metal fabricators. We have laser cutting machines for both sheet and tube, for cutting and engraving, from prototyping through production.
Built to last
High quality components give our industrial-quality machines an accuracy of +/- 0.002”/foot (0.15mm/m). The IPG fiber laser has an infinite lifetime, and produces a 0.004" kerf (0.1mm).
Our machines are affordable for most shops to buy. They’re also cheap to run, costing less than $1 per hour in electricity and shop air. And by using a fiber laser with no moving parts or consumables, maintenance costs are extremely low.
FabLight laser cutting machines come in two models.
Sheet metal up to 1/4 of a standard sheet:
50" x 25" (1270mm x 635mm)
Engraving and rastering
Vector engrave and raster engrave included.
Easy material handling
Pallet pulls out for easy material loading and part removal. Clean out drawer catches small parts.
fablight Tube & Sheet
Round, square, and rectangle,
0.5" to 2" (12mm to 50mm)
Standard length to 55” (1397mm)
Extended length to 80” (2032mm)
Tubes are automatically tabbed so multiple parts can be cut on the same tube length to minimize waste.
Optional tube extension
Tubes up to 80" (1397mm) can be loaded.
Good for thinner sheet metal 0.080” (2mm) and thin-walled tubes
Better for 0.160” (4mm) sheets and tubes.
Best for thicker metal up to 0.250” (6mm), and fastest production on thinner material
Easy to learn software
Get started with practically no training.
We know learning new software can be expensive and time consuming, so we designed ours from the ground up to be both easy to learn and powerful to use. It is included free with all FabLight laser cutting machines, and has step by step options that keep things simple.